How to Use a Plumbing Snake

A plumbing snake is a tool that is used to clear clogs from pipes and drains. The snake itself is made of a coil that looks like a corkscrew. An operator inserts the snake into the clogged pipe and turns the snake’s auger. The snake then moves up and down inside the pipe, loosening up the blockage. The auger’s cable can also be used to attach to a bend or obstruction in a pipe, forcing it back up.

How to Use a Plumbing Snake?

To use the snake, you must make sure the area underneath the sink is clear and free from any debris. You can place a tray or towel underneath the pipe, and you should also have a small bucket ready. Then, insert the snake head into the drain. Remember to unhook the trap arm, too, so that the snake can grind through the clog. Once the snake has loosened the clog, remove the snake from the drain.

A plumbing snake is a useful tool for tackling minor clogs in pipes. It consists of an extendable metal cable with a helix-shaped coiled wire attached to one end www.bilstonplumbingandheating.co.uk. One end of the snake is equipped with a hand crank. Once the clog is reached, turn the crank to make the helix move. It will pull out the clog from the pipe. Using a plumbing snake is not only safer and cheaper but also easier than digging yourself out.

Leave a Comment